克努森数对气膜冷却流动换热相似特性的影响

数值模拟研究克努森数Kn对不同尺度气膜冷却流动换热相似特性的影响,选取孔径为0.3,3,10mm平板单排圆柱形气膜孔模型,计算得到模型在Kn不同与相同条件下冷却效率和孔流量系数.结果表明:Kn相同时,小孔与大孔模型流动换热特性相似,冷却效率及流量系数均吻合很好;Kn不同时,两模型流动换热特性存在一定差异,冷却效率及流量系数吻合较差.因此为在气膜冷却相似放大研究中得到准确的相似结果,需要保证小孔及大孔模型的Kn相同.      

渗透壁面竖直平板Blasius流熵产特性

对渗透壁面竖直平板Blasius流层流边界层流动熵产及传热熵产与总熵产的比值(Bejan数)进行了深入研究,将耦合的动量与能量偏微分方程组通过相似变换转换为非线性常微分方程组,用Runge-Kutta法求解获得了无量纲流函数与无量纲温度的相似解,进而研究了无量纲参数对熵产及Bejan数的影响.结果表明:吸入时最大熵产位于壁面处,吸入速度越大最大熵产越大,熵产随相似变量的增加单调下降;喷注速度越大壁面处熵产越小;近壁面处熵产随变黏度参数增大而增大,远离壁面处随喷注/吸入参数或变黏度参数的增大而减小;远离壁面处Bejan数随喷注/吸入参数或变黏度参数的增大而增大,近壁面处与此相反;熵产和Bejan数随着辐射参数和Reynolds数增大而减小,随着Biot数增大而增大;Biot数在0~2范围内对传热熵产的影响很剧烈,Biot数较小时总熵产由流动熵产控制,Biot数较大时总熵产由传热熵产控制;熵产随滑移参数的减小而增大,Bejan数随滑移参数的增大而增大;Grashof数对熵产的影响较大,在较大的Grashof数条件下熵产随相似变量的变化较剧烈;滑移参数越大,流动熵产越小,Bejan数越大.      

低雷诺数下翼面局部振动增升机理研究

采用计算流体力学(CFD)方法研究低雷诺数下翼面局部振动对翼型气动特性及其流动特征的影响规律。建立局部振动激励的力学模型,并采用任意拉格朗日-欧拉坐标系下的特征线有限元(ALE-CBS)方法对局部振动激励下翼型绕流问题进行模拟,分析局部振动对非定常流动演化的影响规律,揭示其增升机理。研究结果表明:翼面局部变形的增加会有效降低翼型上表面的前缘压力;非定常流动分离中旋涡之间的距离及其演化频率与振动频率的关系是影响翼型翼面局部振动增升效果的重要因素。当流场主频率与振动频率相同,次要频率为主频率的2倍,即发生锁频时,翼面振动产生的移动分离泡能够使分离区从主流获取更多的能量,使翼型上表面保持较低的压力,有效提高翼型升力。     

Analytical method of nonlinear coupled constitutive relations for rarefied non-equilibrium flows

It is well known that Navier-Stokes equations are not valid for those high-Knudsen and high-Mach flows, in which the local thermodynamically non-equilibrium effects are dominant. To extend the non-equilibrium describing the ability of macroscopic equations, Nonlinear Coupled Constitutive Relation (NCCR) model was developed from Eu’s generalized hydrodynamic equations to substitute linear Newton’s law of viscosity and Fourier’s law of heat conduction in conservation laws. In the NCCR model, how to solve the decomposed constitutive equations with reasonable computational cost is a key ingredient of this scheme. In this paper, an analytic method is proposed firstly. Compared to the iterative procedure in the conventional NCCR model, the analytic method not only obtains exact roots of the decomposed constitutive polynomials, but also preserves the nonlinear constitutive relations in the original framework of NCCR methods. Numerical tests to assess the efficiency and accuracy of the proposed method are conducted for argon shock structures, Couette flows, two-dimensional hypersonic flows over a cylinder and three-dimensional supersonic flows over a three-dimensional sphere. These superior advantages of the current method are expected to render itself a powerful tool for simulating the hypersonic rarefied flows and microscale flows of high Knudsen number for engineering applications.     

Response of photosynthetic systems to salinity stress in the desert cyanobacterium Scytonema javanicum

The present study investigated the physiological and biochemical characteristics of Scytonema javanicum, a pioneer species isolated from desert biological crusts, under salinity stress. Pigment analysis showed that salinity decreased chlorophyll a and phycocyanin content, while low salinity increased carotenoid concentration and high salinity decreased carotenoid concentration. Salinity also inhibited CO₂ assimilation rate and photosynthetic oxygen evolution in this cyanobacterium. Chlorophyll a fluorescence transient parameters (φPo, φEo, ψO, RC/ABS, RC/CS, PI_ABS, and PI_CS) were decreased under salt stress, while dVo/dto(Mo), Vj and φDo were increased. The decrease of ETRmax and Yield and the change of chlorophyll a fluorescence transients showed that salt stress had an important influence on photosynthesis. These results indicated that the effects of salinity stress on photosynthesis in S. javanicum may depend on the inhibition of electron transport and the inactivation of the reaction centers, but this inhibition may occur in the electron transport pathway at the PSII donor and acceptor sites.     

马赫数可控的方转圆内收缩进气道非设计点工作特性

基于反正切马赫数分布的弥散反射激波中心体轴对称基准流场,设计了方转圆内收缩进气道,并对其进行风洞试验和数值仿真研究,获得该进气道非设计点（Ma=5.0和Ma=7.0）的工作特性和自起动特性。试验结果表明：进气道顶板压力分布具有反正切曲线特征,出口涡流区小且总体性能优良。Ma=5.0和Ma=7.0时出口总压恢复系数分别为0.647和0.443,对应的增压比分别为20.0和32.7。Ma=5.0时,进气道不但可以捕获约90%的自由来流,而且能够自起动（内收缩比高于Kantrowitz限制）,下临界反压为64倍来流静压,对应的出口马赫数和总压恢复系数分别为1.32和0.409。上述结果表明,本文设计方法可以获得高性能的矩形转圆内收缩进气道。     

低雷诺数分布式螺旋桨滑流气动影响

以高空长航时（HALE）太阳能无人机（UAVs）研究为背景,采用基于混合网格技术及k-k_L-ω转捩模型求解雷诺平均Navier-Stokes（RANS）方程的多重参考系（MRF）方法,对3种螺旋桨-机翼构型的低雷诺数气动特性进行了高精度准定常数值模拟,在等拉力前提条件下,通过对比机翼气动力系数及表面流场结构特征分析了分布式螺旋桨（DEP）滑流对FX63-137机翼的气动影响。研究表明：螺旋桨滑流影响使得桨后总压及流速显著增大,这是机翼升力增大的主要原因,但同时机翼阻力特性急剧恶化,升阻比反而降低;螺旋桨滑流向机翼边界层内注入丰富湍动能从而抑制流动分离,扩大机翼表面湍流范围及附着流动区域;分布式螺旋桨滑流与低雷诺数机翼表面复杂流动相互作用显著,主要表现为滑流区域边界展向涡结构的产生。     

胚胎电子细胞中基因备份数目优选方法

分析现有胚胎电子细胞基因存储结构的基础上,考虑基因备份数目对自修复过程的影响,建立了可靠性模型;并根据存储结构的具体实现方式,建立了硬件消耗模型。以可靠性模型和硬件消耗模型为基础,通过分析可靠性、硬件消耗与基因备份数目间的关系,提出了一种基因备份数目优选方法。该方法根据目标电路的可靠性、硬件消耗设计要求,选择兼顾系统可靠性、硬件消耗的基因存储方式、基因备份数目及胚胎电子阵列规模,具有工程应用价值。通过某电路的基因备份数目的选择,对该方法进行了验证。      

挡板对四模块可调进气道特性的影响

针对RBCC发动机Ma=2.5～7.0宽范围工作要求,设计了顶板部分可调的四模块二元变几何进气道,并研究了挡板对其总体性能和流场结构的影响.数值计算结果表明:进气道整个工作范围内总体性能较优,特别是流量捕获能力.带挡板时进气道流场基本保持了二维特征,不带挡板时两侧具有明显的三维特征,压缩效率降低,流量系数显著下降.带挡板时进气道左/右模块性能基本相等,不带挡板时左/右模块差别明显,与右模块相比,左模块基本保持了二维流动特征,压缩效率明显更高.     

Influence of shock wave impinging region on supersonic film cooling

Shock waves can significantly affect the film cooling for supersonic flow and shock waves may have different influence when impinging in different regions. The present study numerically compared the results of shock wave impinging in three different regions and analyzed the effect of impinging region. The shock wave generators were located at x/s = 5, 25, 45 with 4°, 7° and 10° shock wave incidence. The mainstream Mach number was 3.2 and the coolant Mach number was 1.2 or 1.5. The numerical results illustrated that the shock wave impinged in the further upstream region led to a larger high-pressure region and a larger vortex in the boundary layer. Moreover, placing the shock wave generator upstream resulted in the lower mass fraction of coolant in the downstream region. The velocity in the upstream part of the cooling layer was lower than the midstream and downstream part, which resulted in the less ability to resist the shock wave impingement. Therefore, the upstream impingement deteriorated the cooling performance to a greater extent. The study also manifested that the stronger shock wave had a larger effect on supersonic film cooling. Increasing the coolant inlet Mach number can increase the blowing ratio and reduce the mixing, which was of benefit to improve cooling effect.